Ask Experts Questions for FREE Help !
Ask
    pfinczak's Avatar
    pfinczak Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 9, 2010, 08:17 PM
    Light quit working
    I have a Winward II fan for about 5 yrs now. Fan works great, but the light recently quit working. I replaced the circular light tube, but still does not work. As per the life time warranty, should I take the fan back to Home Depot and ask for a replacement?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Nov 10, 2010, 03:42 AM

    Yes, as it can be one of several reasons for the light to stop working. Just be sure you have power to the light.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My speakers quit working. They are plugged in and power light is on [ 1 Answers ]

Remote light dimmer control quit working [ 1 Answers ]

I have a Portfolio light dimmer control unit with the receiver under the canopy of my ceiling chandler light. The sending unit is remote. It worked well for over a year, but then the light ceased to turn off with the remote sending unit. I changed the battery, and the dip switches are the same...

Quit working all together [ 1 Answers ]

Central heat and air. Heat is gas. House got really warm and I switched from heater to a/c. I turned it off at the end of the night and the next morning it was really cold so I tried to turn the heater on and nothing at all happens. I tried to turn AC on and nothing happened. I looked for a...

Fan Quit Working [ 5 Answers ]

I have a Harbor Breeze fan w/ remote in my living room. After installation, it worked great for about a year. After winter, I switched the fan so that it would reverse flow and push the air down. When I went to start it about a month later, the fan did not work. The light still works, but the...

Fan & light suddenly quit working [ 1 Answers ]

Replaced battery in remote and check switch, both okay. What should I check next?

View more questions Search