Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet tank doesn't refill. No water in tank make it flush
[ 17 Answers ]
My toilet was working properly before tonight. :p There was no slow leak sound; nothing. Now when the handle is pressed, nothing happens. I opened up the tank and found there was no water in the tank. :( I've been searching the Internet for answers, but haven't found any that address this...
Toilet Flushing: tank drains, toilet doesn't flush, brand new toilet.
[ 4 Answers ]
I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...
Cast iron leaking under toilet & other toilet won't flush
[ 1 Answers ]
I noticed my kitchen sink stopped up. Checked both downstairs toilets, one drained fine other didn't. Grabbed the plunger. Plunged the toilet @ North end of house & no results, went to toilet on South end of house no result. Went back to sink, filled up with water & then plunged it. Water went...
Toilet tank lever breaks when I try to flush toilet
[ 1 Answers ]
I have a problem trying to flush my toilet. When attempting to flush the plastic tank lever often breaks and when I use the metal tank level they often bend. The only way to flush the toilet is by removing the top and pulling up the tank ball lift by hand. What can I do to solve this problem. Thank...
Toilet flange--flush or on top of floor
[ 2 Answers ]
I have a cermaic tile floor going in. does the tiolet flange need to be flush with the tile or can it sit on to of the tile.. I planned on it sitting on top, but I seen else where when they have been installed sitting flush with the floor. Which way is correct? View more questions Search
|