Ask Experts Questions for FREE Help !
Ask
    dt812's Avatar
    dt812 Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Nov 7, 2010, 06:11 PM
    Installing electrical for a new dishwasher
    I am installing a new dishwasher in a new space. Its adjacent to my sink. The house was wired for a gar disposal so I'm set for a dedicated circuit. I decided to hardwire using the existing box, and mc cable. I have the cable attached to the box using a 90 degree squeeze connector clamp, and special cover plate made to accept this connector. The cable runs through to connect to the dishwasher electrical box. Am I missing something? Is the average plastic wiring box OK to use with this? I read from one person that a metal box might be preferred.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #2

    Nov 7, 2010, 08:26 PM
    It usually isn't a problem hard wiring the dishwasher unless it already had a wired plug. When you alter the original mfg. configuration, you void the warranty and also compromiose the UL listing... just so you know.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing an Electrical Sub Panel [ 4 Answers ]

I am helping a neighbor, who has a new garage that needs an Electrical panel installed. He has a Mobile Home pedestal that only has a space for a 2 pole breaker. This would be great for the Garage feed, but he also would like a 50 amp RV Plug near the Pedestal which is approx 100 feet from the...

Installing new electrical outlets [ 2 Answers ]

I am adding a new eletrical outlet in my finished basement. The good news is the wall I am adding the outlet to has a closet behind it so I can get in behind the wall to run the Romex, mount the box to a stud, cut the hole for the box, etc. My question is, the closet has a light in it can I tie in...

Installing a Whirlpool Dishwasher [ 1 Answers ]

We just purchased a Whirlpool dishwasher. It doesn't have levelling legs at the back, but rather adjustable wheels. We still need to raise the dishwasher up a bit so the instructions say to shim it and secure the shims. What do you suggest for this? We used wooden shims and just taped them to...

Installing a new dishwasher [ 8 Answers ]

My contractor installed all new plasterboards and new electric sockets. He installed one behind the stove for the electric starter but the dishwasher is going to be located to the right of the stove. All the plumbing was done and ready. Do I have to have the electric socket right behind the...

Installing dishwasher in a island [ 2 Answers ]

How do I hook up a drain line for a dishwasher in a island there is no sink in island

View more questions Search