Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman Furnace Model GMPN100-4--No Heat
[ 3 Answers ]
The inducer fan motor starts,the hot surface igniter heats up and the gas valve opens producing a nice blue flame for 3 or 4 seconds and the gas valve shuts off. There are no red flashing lights to indicate a problem with any components. This unit was built around 1993. Any ideas on what might be...
Goodman Gmpn100-4, Fan works- no heat!
[ 12 Answers ]
Hi, I have a Goodman, Dependable 92, Gmpn100-4. THe fan works, but the heat doesn't. There are no indicator lights that flash(red). The ignitor glows for about 3 seconds and then shuts off w/o lighting the furnace. Any help would be appreciated.
My Goodman heat pump, model GSH130361AD, in heat mode outside unit does not start up.
[ 10 Answers ]
Goodman heat pump, model GSH130361AD, Goodman AEPF series Air Handler, and a Honeywell T8411R t-stat. After wiring and setting everything up, the A/C works very good. In heat mode the aux heat comes on but the outside unit does not start up. Emergency heat works well too. The units are used...
Goodman pgj036100-1 blinks 4 times
[ 2 Answers ]
My goodman pgj036100-1 will start burners, heat for about 60 seconds flames go out shuts down and light blinks 4 times
Goodman furnace troubleshooting/pgj036100-1
[ 1 Answers ]
It is a goodman gas pack unit Model PGJ036100-1 the burner will come on and burn for about 5 minutes then shutoff the high limit switch is not tripped. The burner will re-light and burn for 5 minutes again and keeps doing this over and over. View more questions Search
|