Ask Experts Questions for FREE Help !
Ask
    lostintheusa's Avatar
    lostintheusa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 6, 2010, 07:13 PM
    Lennox cb29m 46 electric heater elements and sequencers
    Turned on the furnace for the first time this year and the air from my registers is warm but not hot.

    How do I test my lennox cb29m 46 electric heater elements and sequencers

Check out some similar questions!

I have a whirlpool electric water heater that doesn't work. How do I change elements? [ 14 Answers ]

I have a whirlpool electric water heater that doesn't work. How do I change elements? Do I have to drain the unit first? Is there any other reason why it would not work? The breaker box is not tripped. Thank you.

Wiring a lennox cb29m [ 4 Answers ]

I have a totaline P474-1050 stat, Lennox cb29m-51-1p FAU, and a lennox HP 26-042-7P heat pump. It was working fine and one morning it stopped. There is a white wire hanging free in the FAU that looks like it should be connected. My wire path goes like this: STAT FAU HP R ...

Old electric furnace elements [ 8 Answers ]

Greetings, I have an old electric furnace in my attic that keeps burning up heating elements. This is a very old unit and unfortunately I cannot locate the mfg/model information on the unit. I'm estimating it to be 20+ years old. I have purchased replacement "restring" kits (Napco D500)...

Wireing diagram for Lennox model: CB29M-41-1P [ 1 Answers ]

Hello, I recently purchased a Lennox Elite Series Furnace/Heat Pump used and I need to wire the unit in. Does anyone out there have a wireing diagram for this unit?? Thanks, Larry Denney

Frigidaire electric stove model cfef357cs2 elements in oven will not work [ 2 Answers ]

Fridigidaire stove digital panel elements in oven will not come on the elements themselves are fine

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.