 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring a horn for a 1978 chevy truck?
Got a fiamm horn to replace original horn. Ground is on a disconnect - the other wire is thicker gauge tied together with another wire that is broken off. Used heavier wire and horn sounded once then nothing. Tried two wires in disconnect still nothing. Is there a fuse issue or maybe steering wheel?
|
||||
Check out some similar questions!
My husband wants to replace the old am fm radio but does not have a wiring diagram. Can anyone help? I don't want him to blow the radio he bought. Thanks
:confused: 1994 Chev K1500 4x4 When the truck is running there are no brake lights, when the truck is off the brake lights work. I checked wiring schematics, tested the wires, removed the trailer wiring. Can anyone solve this mystery?
I bought a 2000 chevy from a kid. He was trying to put in a radio. He cut the harness off right at the plug. Shorted out the dash. I need to know all the colors and what they are 4. he only cut the main one. The one with 3 greens 2 grays brown red orange peach and more. I do have a aftermarket...
Truck runs fine but dies when you put it into gear, when I power brake it it will stay running but right as I let off the gas in gear it dies , rebuilt the carb , timed and adjusted , smoke and vac tested it no leaks I just don't know it is a 1978 chevy 2500 5.7 auto any I deas?
My husband recently purchased a 1978 Chevy Scottsdale (dirt cheap) it had a broken flexplate, he replaced the parts and the truck ran like butter for awhile. The other day the flex plate broke again. Now I'm not up on mechanical stuff and he tries hard any tranny knowledge would sure be greatly...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
