Ask Experts Questions for FREE Help !
Ask
    rambo13's Avatar
    rambo13 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2010, 07:33 AM
    Wire two wire to a three wire thermostat
    Can I use a thermostat for AC and heat for heat only? I have two wires if so on what terminals , where to put the wires ? It is a honeywell 5-2 thermostat. Thanks, Larry
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Nov 5, 2010, 07:44 AM

    Yes, but you will be changing battries more often. One to rh and one to w
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...

How to tell which wire is the hot wire, neutral wire and ground wire [ 10 Answers ]

I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement? [ 3 Answers ]

I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...

How to wire up a house thermostat 6 wire to a 5 wire [ 2 Answers ]

I have a old honeywell thermostat that 6 wires no one make it no more I got a new 5 wire thermostat honywell how would I hook it up

How to wire 3 wire 2 zone cooling only to Honeywell thermostat [ 10 Answers ]

I currently have two zones for cooling only and the thermostat wires are red, blue and white. The red is labeled Rc which is easy, the white is labeled W Heat (this doesn't make sense to me) and the blue is labeled cool? What I think I need to do is connect the red to the Rc on the thermostat,...

View more questions Search