Ask Experts Questions for FREE Help !
Ask
    jeffquilty's Avatar
    jeffquilty Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2010, 12:17 AM
    Brake light flashing
    1990 chevy, 1500, 350, at, parking brake flashes 10 times and on the 10th time it stays solid for a second or two and then starts the fleshing over again??
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Nov 5, 2010, 06:49 AM

    Sounds like the parking brake is adjusted too tight--back it off a little and you should be fine. Did you recently have the rear brakes replaced?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to adjust brake light sensitvity at brake pedal -Dodge ram 2002 [ 1 Answers ]

Hi. My brake lights come on sometimes after I have left vehicle. I can force them off by pulling up on brake pedal or wedging something behind pedal. It kills my batteries when it goes un-noticed. Is this an adjustment? Or do I need to replace the brake switch? I have looked (awkward to get at)...

Changed 2000 camry brake light switch, but still will not shift and no brake lights [ 1 Answers ]

My sons 2000 Camry stopped shifting, no brake lights and no cruise control. I changed out the brake light switch, but it still does not work? Any ideas, please. Thanks

The Ok light is flashing, the Flame light is off in the furnace circuit board [ 0 Answers ]

I have a Ruud Silhouette II Gas Furnace. The whole unit is turned off/on by a light like switch. The AC is working, but the heater is not. It appears that no gas is flowing to the burner. The PWR light is on, steady. The OK light is flashing; three times on, then off. The Flame light is off in...

1996 dodge ram abs brake light is always on even though the park brake is off [ 3 Answers ]

I have a 1996 dodge ram 1500 and ABS brake light won't shut off even though the park brake isn't engaged could that be the ABS sensor need to be changed ?

Emergency Brake light stays on after brake is realeased [ 3 Answers ]

What would cause the emergancy brake light to stay on after the emergancy brake has been released on my 2002 Ford Explorer?

View more questions Search