 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
We have uneven osb floors; so floor leveler or luan?
We are remodeling an older home with osb for the subfloor. The floors are uneven in many places. There are 3 bedrooms that we want to carpet, so would you recommend floor leveler or put down luan to get an even start?
|
||||
Check out some similar questions!
Hi everyone, I had a man come in today to my house to install a new laminate floor. He said he didn't like to do it because the floor was uneven in places and he said that in two months the laminate could just break. I have seen some website saying that its OK to install laminate on an uneven...
Am having hardwood installed and dinette floor sags in the middle. Tried Universal mix with water leveler over chipboard and now it has to be removed since its dried. Have been using chisel and hammer but its very slow going. Any suggestions?
I have installed Durock in my kitchen floor, and after I glued and screwed it all down, I noticed that the floor is all on one plane, perfectly flat, except for an area that runs from one of the walls to a spot about three feet from the wall. This area slopes downward. So... Can I use a floor...
I have a 30 year old fiberglass tub with no support under it - 1.5 inch gap over subfloor. I saw the same question on mar 17, 2009 so wanted to try the recommendations of shoving balls of structo-lite in material squares under the tub and letting it set up. The man at my local lumberyard talked...
How do I remove excessive (dry) floor leveler?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
