 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Old carrier gas furnace
Modle#58dr100ba (series#121) interminttent pilot, the furnace pilot sarks then lite's but gas valve dose not open. The gas valve is also making a huming noise, I tapped on and it opened up! I had flames and heat until I turned it off to put everything back together then it started doing the same thing. Could it be a bad gas valve or what?
|
||||
Check out some similar questions!
My Carrier 58SS gas furnace starts up and lights up the burners and operates normally for 2 minutes, then the burners shut down but the igniter and pilot light continue indicating the thermostat is requesting the furnace to heat up the house. I changed thermostats to see if that was the problem...
I have a Carrier Gas Furnace, and the pilot light works, but the furnace does not fill with gas, nor does it fire-up? Worked up to 70 degrees yesterday, but does not work at all today.
We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:
I have a Carrier 58sxa100 furnace. The thermostat calls for heat. The furnace runs for awhile then shuts off. I turn the power off and on and the furnace restarts. Runs for awhile then shuts off. I keep repeating the off and on procedure. Did anyone have this problem and know how to solve it
I have a 58TUA120 Carrier Gas Furnace. It keeps going out on code 32 (pressure switch). I have replaced the low fire pressure switch, checked the flue (it's completely clear) and the control board. Carrier technical support is taking days to get back to me. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
