 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Blower switch on furnace
Hi
The blower on my furnace is on all the time. I can only shut it off by turning the main power switch off. There is always air coming out of the vents in the house. I have a Roberts Gordon GL120A furnace. I would like to know what may be causing this and how easy it would be to fix. Thanks |
||||
Check out some similar questions!
Board says it is a limit switch fault Furace goes into pre ignition, fan comes on and sometimes even the main burner ignites, but the blower will not come on... is this the blower motor or could this be a switch somewhere?
Hi, I would like to add a switch to my furnace so I can turn the fan/blower on and circulate air in our house in the summer. If you look at picture 'B' below you can see I wire sticking out from the 'R' connection - I tried to jump the 'R' connection with the 'GH' but it did not work after I...
The furnace is not working and prior to purchasing a control board, I am trying to find the blower compartment safety switch. The exhaust pipe was accidentally moved when a new roof was installed. Perhaps the safety switch has been thrown. I am not able to find it. Hopefully someone can tell us...
I have a gravity furnace. On one leg of the system I' ve Placed a small 110volt blower fan with a manual switch. Is there any type of switch that can be wired into the 24 volt furnace thermostat so the blower only runs when the furnace is on.. I've added this to give a little heat to the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
