Ask Experts Questions for FREE Help !
Ask
    rstoys's Avatar
    rstoys Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 3, 2010, 08:56 AM
    What is the average temp of an inducer motor
    What is the average temp of an inducer motor when running. Mine gets between 120-165 degrees and there is a burning smell.

Check out some similar questions!

Goodman inducer motor [ 2 Answers ]

Hi, I live in near Nashville, Tenn. I have a Goodman HVAC unit model PG036100-1B REV E (gas furnace and A/C unit) over 20 years old. It started to make a very loud grinding noise when the furnace came on, so I had it inspected by a local HVAC repair company, and the tech said the inducer motor is...

Bryant plus 90 inducer temp? [ 0 Answers ]

Bryant plus 90 furnace, inducer motor temp reaches over 160 degrees and has a burning smell. Tech was out last night and said it was a bad heat relay on the circuit board and needs to replace it. He bypassed the relay and said it was OK to run. I will only run the main blower in the ON position and...

How much for an inducer motor? [ 1 Answers ]

How much should it cost to replace a goodman inducer motor that is humming?

What is the inducer motor [ 3 Answers ]

I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...

Cracked inducer motor [ 3 Answers ]

Hello, I had a heating company come out and replace the ignitor on my furnace this morning. While they were here they mentioned that my inducer motor has a crack in it. They said if we don't have a new motor replaced this could cause carbon monoxide poisoning. Has anyone else heard of this? ...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.