 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring diagram for ITT T99BV303J
I am trying to replace an old ITT thermostat model T99BV303J with a new programmable thermostat. The new Honeywell model RTH2300 says I need to identify the terminals (Y, W, R, G, etc) in the old thermostat as a first step. Nowhere on the old thermostat does it say what either of the two wires (one red, one white) is associated with. Is there a way to determine how the two wires correspond to the terminals in the new honeywell thermostat?
|
||||
Check out some similar questions!
Help, I need wiring info for an old ITT general control gas valve on an outdoor swimming pool heater. The valve has 4 terminals, 2 labeled thermostat and 2 for the millivolt generator. I understand the safety devices get wired in series but I am not sure how the on/off switch and thermostat get...
I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter
I have an old ITT General Controls (mercury switch) thermostat for our electric furnace. I am trying to replace it with a Honeywell RTH230b thermostat. The old wiring has four wires (two white and two red) which are attached to screws labeled "F, H1, H2 and V". Looking at the wiring diagram on...
Need a wiring diagram for Hampton Ceiling Fan with remote control
I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
