 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Thermostat clicks to call for heat then shuts off.
Thermostat clicks to call for heat, burners burn for about 15 seconds then the thermostat clicks and shuts down and it does this many times. I have a very small home so I got a small furnace Empire Comfort Systems Model FAW-40-1 SPP Thermostat model is Ritetemp 6005. Any ideas would help me out thanks.
|
||||
Check out some similar questions!
I have a lux 1500 thermostat. When I turn the heat on, I hear it starting up but there isn't any heat coming through the vents. At 1st Filter was flashing on the thermostat so I replaced it. I also replaced the batteries. I t worked well for about 5 minutes then nothing. I turned it off then back...
Lennox G24M Gas furnace and a Hunter 44110 Digital Programmable Thermostat that I installed when I moved into this place (replaced an old rotary thermostat)... Worked fine for AC, but now this is my first winter in this house.. The heat absolutely refuses to get the room temp up to 75.. What...
Problem with a/c & heat thermostat Someone in my house knocked the thermostat loose from the wires I bought a new one, the same type, connected it and it will not go on. It will not call for heat. Don't know what to do now. Can anyone suggest anything?
I have a gas forced-air furnace 3-5yrs old. Honeywell setback type thermostat (set to "HOLDTEMP") My problem is the furnace seems to shut off before it reaches set point (ussually 4-6 degrees below set point) I changed the thermostat and still the same issue. If I turn the power off to the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
