Ask Experts Questions for FREE Help !
Ask
    EDDIES's Avatar
    EDDIES Posts: 3, Reputation: 0
    New Member
     
    #1

    Oct 31, 2010, 09:42 AM
    Noise in my piping when water is on.
    Why when i turn on my wter in any part of my house, bathroom,kitchen sink, outside water hose there is a viration and a loud sound that sounds like a small train is passing by. and stops about 30 seconds after the fauset is turnede off. What is the cause?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Oct 31, 2010, 10:10 AM

    Is your caps key locked or something, this makes it look like you are yelling at us. While the noise is happening try to isolate it to one point. It could be your main shut off valve for the house or even a water filter or water softner.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #3

    Oct 31, 2010, 10:58 AM

    FIRST OFF, LOSE THE CAPS! We don't yell at each other in here.
    We need more details. Is 5there a PRV valve, pressure reducing valve, installed? What's your house PSI?
    Where is the noise the loudest? Noise= vibration. Starting at the point of entry in your house feel for vibration and listen fro sound. I need to know exactly where the sound is the loudest and the vibration's the stronges Back to you, Tom.
    EDDIES's Avatar
    EDDIES Posts: 3, Reputation: 0
    New Member
     
    #4

    Oct 31, 2010, 11:16 AM
    The pressure at the pressure valve is 90 lbs. and the noise is the loudest it seems at the garage wall where the pressure valve is installed. There is also a clicking noise when water is on. It's in the area of the valve.

    Sorry about the caps, I'm not computer knowledgeable, it won't happen again
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #5

    Oct 31, 2010, 11:55 AM

    90 psi is pretty high an could be partially the problem. Adjust your pressure reducing valve down to about 45 psi and tell us if the problems is any better
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #6

    Oct 31, 2010, 12:05 PM

    High house pressure puts a strain on the joints in the pipes and on all the valves and stops. I've got to hunch that once you back off the pressure that the sound will go bye-bye. Then average house pressure is between 40 and 60 PSI with the norm at 45PSI. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Supply Piping [ 5 Answers ]

We recently remodeled our bathroom and all pipes in and out were replaced with PVC. The original water supply pipes are galvanized. I guess our code calls for copper or galvanized water supply lines. Am I screwed if I ever want to sell? Will I be forced to replace with copper?

Chilled water piping painting [ 4 Answers ]

Before insulating the ch.water piping ,(in high rise building) it is painted red oxide paint. Is it advised to paint this red oxide painted piping to paint black before insulating?

Chilled water piping [ 0 Answers ]

What is a safe operating pressure for a chilled water system?

Piping Configuaration For Water Softner [ 2 Answers ]

:confused: Hello, I recently purchased a single unit water softener. I have it set on the hardest water setting it has, but my water is not any softer than before I purchased it. I am wonder it if may be my piping configuration. The line going into the softener is connected to the main line...


View more questions Search