Bryant 395A furnace will not ignite

Check out some similar questions!

Bryant Plus 80 gas furnace won't ignite burners [ 6 Answers ]

I own a Bryant Plus 80 gas furnace. The fan will run if I set the thermostat to "Fan On" instead of "Fan Auto". But the burners will not ignite. I have followed the user manual instructions to re-start the furnace, but that didn't work. I have a gas water heater and it is heating so I know the gas...

Bryant 383KAV Furnace repeatedly tries to ignite but fails [ 3 Answers ]

For the last two nights (very cold weather) our Bryant Furnace appears to be attempting to start, fan kicks in and the burners ignite then it shuts off 2-3 seconds later this happens repeatedly. The first night (around 3 am) I noticed this I turned the heat off with the thermostat and left it for...

Bryant Furnace turns on but does not ignite [ 1 Answers ]

Bryant furnace come but fails to ignite. I have replace the flame sensor and ignitor but still does not ignite.

Bryant furnace HSI light comes on but doesn't ignite the fire [ 3 Answers ]

I have a bryant furnace model 373lav036035 fan comes on and igniters glow for about two minutes and shut off but the fire doesn't come kick on but I think it shuts off blower and igniter because gas valve doesn't kick on and let out flame can you tell me what the problem is

Bryant Gas Furnace fails to ignite [ 3 Answers ]

My Bryant Gas Furnace occasionally fails to ignite. When this happens, I can reset it by turning the switch by the furnace off and on. It will then ignite after sparking for 30 seconds or so. The furnace has a pilot that is on and becomes large when the thermostat directs it to, but after sparking...

View more questions Search

Check out some similar questions!

Add your answer here.