Pilot is Lit, Burners not turning on...

askme66 Posts: 3, Reputation: 1

New Member

Oct 26, 2010, 02:15 PM

Pilot is Lit, Burners not turning on...

I have Teledyne Lars Gas Furnace... JVT. The pilot is lit, however the burners aren't firing up. The power venter is on when I call for heat through the thermostats inside the house... I can also hear the forced hot water (actually cold since no burners) moving through the baseboards. I originally thought that my transformer was bad... for it looked old, a bit charred, etc so ordered a new and replaced it thinking that would do the trick. NOPE. Any thoughts?

Check out some similar questions!

Furnace burners will not turn on, but the pilot is lit. [ 6 Answers ]

I turned on the heat for the first time this season and no heat came out. I checked the furnace and the pilot was out. I lit the pilot and it stays lit (been on for over a day now.) I tried the heat again and still nothing. So, the furnace is getting power, the fan works when "ON." The pilot...

Carrier heating unit, we lit pilot but others burners will never light and so we have [ 1 Answers ]

:confused: We are freezing to ice cubes here, please someone help us with an answer. We lite the pilot on our Carrier system just as the instructions on the panel say to do, but when we turn it to on nothing happens. The blower blows cool air. The burners are not lighting inside. Last year...

Gravity furnace pilot is lit but burners aren't working [ 14 Answers ]

I have two large gravity heaters - the kind with asbestos octopus ducts - in my basement. They were made by Pacific Gas Radiator Company (Huntington Park, CA). The pilot lights but the burners do not fire. I try to clean them out each year, but I have the problem repeatedly. On the other unit, the...

Pilot is lit but burners will not light [ 7 Answers ]

I have a Fraser-Johnston closet mounted Natural gas using Central heating unit. The unit has been off all summer and I just changed the filters and relit pilot. When I set the thermostat I hear it click at the right temputure for it to turnon but the burners don't even try to light.. Could it be...

Pilot light lit, but burners won't ignite? [ 4 Answers ]

I've got an older Williams model Propane furnace (model # 450sfa-2) controlled by a Lux 1500 Thermostat, and I've tried everything I can think of. The Pilot lights and stays lit, but the burners will not ignite. Any help will be appreciated, it's been cold the last few days (<45 degrees......

View more questions Search

Check out some similar questions!

Add your answer here.