[jessness]

I extended a box over a couple feet to supply power to DW n GD n Hot Water box. I used a gfci outlet in replcaement of a 20a outlet and now when I plug in GD it constantly runs and no response from switch. Should I go back to the old 20a outlet and wire a top and bottom separate cirquit on the one 20a outlet and not use a gfi at all?

[tkrussell]

You either wired it wrong, or did not split the jumper between the two brass scres on the new outlet.

[donf]

Okay, what you are describing seems to be a correctly functioning receptacle.

You are aware that a GFCI receptacle is not required under the sink.

If you GD is running constantly, I would suggest you check the wiring to and from the switch that controls the GD.