Ask Experts Questions for FREE Help !
Ask
    eric34's Avatar
    eric34 Posts: 56, Reputation: 1
    Junior Member
    		  
    #1

    Oct 25, 2010, 12:45 PM
    Reloading Windows XP
    I needed to redo my operating system, I had a virus.
    I formatted my drive using SpotMau, made another partion. When |I when to load windows XP using the install disc I get the blue screen as soon as it says "setup is starting windows". I though it was a ram problem but have swapped ram around and using different slots. If I take the hard drive out of the laptop I get the blue screen at the same spot. I'm sure it's because I partitioned the drive first.
    What do I need to install windows, 1 partition at NTFS?
    I kind of thought that windows install disc would ask me to format if it was wrong.
    I need some help.
    GrantHillsSA's Avatar
    GrantHillsSA Posts: 405, Reputation: 9
    Full Member
    		  
    #2

    Oct 26, 2010, 01:54 PM

    Try resetting your BIOS to default and reload again. Worked 70% of the time.
    eric34's Avatar
    eric34 Posts: 56, Reputation: 1
    Junior Member
    		  
    #3

    Oct 26, 2010, 03:36 PM
    Can this hurt anything? How do I do it?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lost sound after reloading window xp. [ 14 Answers ]

Lost sound after reloading window xp. Checked sound and audio devices in contol panel and it says --no audio device with the volume section greyed out. There is no speaker icon anymore on the tak bar. Checked Add hardware in cotrol panel and genric volume is working properly it says. Can you please...

Reloading weedeater [ 1 Answers ]

I have a RYOBI 725 weedeater, how do you replace the line when it runs out?:confused:

Reloading weed eater lines. [ 3 Answers ]

I seem to be having a lot of trouble loading the line into our weed eater. This is the second weed eater I have purchased, but I am having the same problem--must be my fault and not the machine's. As far as I know, I understand how to set up the line and feed it through the appropriate holes in...

Reloading trimmer line into a Weedeater. [ 1 Answers ]

I was given an electric Weedeater, model 307 with an 8" cut . The line is missing and I don't know how to replace it. I went to Lowe's and Walmart and found nothing for this model. Do I need a cartridge or just replacement string?

View more questions Search