 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I'm trying to make this old Magic Chef furnace work in my garage. I got it and the Fan Control Center was broken, laying inside unwired. I have no wiring diagram for this unit but the M# is G76-7502 C2-5. I need help wiring the fan control center and the fan limit switch to power. I bought a new...
I have a ducane oil fired furnace, During the winter my burner was giving me problems so I replaced it.. Now that its summer I knew I had to mess around with the wiring Because I only tied in R/W from the tstat to the primmary for heat.. Come to find out the Beckett AFG I installed is not matching...
Need to know which wires of the 5 go together. There are 3 from the relay( black; brown and red) the other 2 blackand the other wire white. Also, if possible send picture!! Mars - fan control center model # 24013
I just replaced the circuitry in my (Hunter) ceiling fan. The fan speed selector (in the wall) works fine for the light and the fan will sound like it is accelerating with each speed selected, however it will only maintain spinning in the highest speed. In each of the lower speeds it "selects the...
OK now its my turn with a question, I`ve ran across a gas furnace (older Bard) that's about 20 years old. Someone removed the fan center that was in it for running a/c /ga heat changeover. Wire for wire how do I reinstall a new fan center,, it has 3 wires coming from the relay and 2 from the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
