How do I wire a circuit that goes from power to 3-way to dimmer to fixture?

Check out some similar questions!

New light fixture now dimmer won't work? [ 1 Answers ]

We installed new chadelier with 6 candlebra stye lightbulbs. Now the dimmer switch does not work, but is usable to turn light off and on.

Add Dimmer to Ceiling Fixture--not Receptacles [ 9 Answers ]

I just bought anew condo and the wiring in the dining room is a little strange. In the wall switch box, there is one incoming and two outgoing wires. One of these wires powers half the receptacles in the room, the other one powers the ceiling light and the other two receptacles. In the...

How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power and 12-2 to lights [ 1 Answers ]

How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power wire source and 12-2 to between the 6 lights and then using 12-2 witing to the single pole switch?--need your help please

Adequate wire size for 5- fixture circuit ? [ 2 Answers ]

I'm on the home stretch in a garage to apt remodel. One remaining task is to put 5 , single lamp fixtures on the exterior wall. The power is a 12/2 nm, 20 amp breaker circuit from panel to switch, roughed in the wall to the center fixture box location. This will also be the j-box for the remaining...

3-wire capacitor to work like a 2-wire in a fan ceiling combo with new dimmer [ 21 Answers ]

I have bought a FAN/LIGHT dimmer switch in lieu of the regular switch with the pull chains on my fan/light combo. I haven't even started with the switch portion where I have red wires and one thick black one. I am still working on the damn pull chain to NON pull chain setup now. I have this same...

View more questions Search

Check out some similar questions!

Add your answer here.