 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
We installed (actually my Dad installed) a new Harbor Breeze fan with light about 9 months ago. It's connected to a remote. The fan works great, but the light stopped working. I found it needed a new bulb and when installing the new bulb, the light is extremely dim when turned on. It doesn't...
I am trying to wire a switch with a harbor breeze switch to operate the fan and the switch has 3 sets of black and white wires along with the grounding wire. How do I wire this to the fan switch which only has a grounding wire and 2 black wires?
The harbor breeze fan/light does not work with remote. Thae light works by pull chain but fan does not. The light on remote turns on when I press light or fan , but does not work fan or light
I am a wiring in a Harbor Breeze Fan (w/ light) where the old ceiling light was: I have one bundle of white wires that had one wire going to the old fixture; A single white wire that also went to the old fixture; & a bundle of black wires that bypassed the old fixture. I have assessed that...
Switch was bad but when replaced now the circuit break kicks. Put the new switch on another fan and it does the same thing there. Bought another new switch and it kicks breaker on both fans as well. These are two wire switches so no room for being wired wrong. Need help in determining if switches...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
