Ask Experts Questions for FREE Help !
Ask
    KimberlyGinFL's Avatar
    KimberlyGinFL Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 22, 2010, 03:39 AM
    Where & to what hoses lead to or attach to??
    I'm a single female living in a 2002 mobile home. I'm in the process of trying to replace the bathroom sink. Can you explain to me where & to what hoses lead to or attach to (as I realize "one end" of them eventually supply water to the faucets). I can't see where & what the other end of the hoses attaches to beyond the small floor opening. The remainder og the plumbing pipes seem to originate from the wall.

    Thanks in advance for helping me learn some basics.

    Kim
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Oct 22, 2010, 05:32 AM

    Hi Kim,
    I assume the "hoses" are the supplies. If you took them apart what's the problem with hooking up the new supplies the same way?
    I can't see where & what the other end of the hoses attaches to beyond the small floor opening.
    What small opening in the floor? You should have everything coming out of the wall. '
    Kim, did someone else tear this a[art and you're attempting to put it back together? We have a lot of mobile factories in my part of Florida and back in the 70's I worked as a line plumber for them so I'm familiar with mobile homes.
    Can you take a picture and show me? What's the condition at the present time? Is every thing capped off? Just what kind of lavatory are you replacing? A wall hung or a vanity. In short, I need a lot more details then you've given me. Back to you, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Collapsed hoses in car [ 1 Answers ]

My radiator hoses are soft and recently changed water pump and thermastat because I had very little to no heat. With the new items installed the temperature gage shows low pressure. I was wondering if maybe the hoses were the real problem?

Stuck washer hoses at shut off [ 1 Answers ]

Had installed new washer and dryer few days ago and installer could not get old hoses Off at shut off's. He was scared he would break lines since washer / dryer on 3rd floor of Town Home... I personally tired and couldn't get them loose. Is there a secret way of getting them loose i.e. WD-40, heat...

How thick is the lead in a lead joint [ 2 Answers ]

Im getting ready to take the Indiana pluming test and I was wanting to know how thick the lead Is suppose to be in the hub of the cast iron.

Washer hoses [ 1 Answers ]

I bought a used washer with no hoses so I went and bought hoses and I don't know it connecting them by hand will suffice ior if I need a wrench. Also more importanly, what do I do about he drain hise I don't have one how do I hook that up once I get one. I am not adept in plumbing at all.


View more questions Search