B+S 3.5HP Mdl 91202-1309E1 - Carb connections

aussid Posts: 2, Reputation: 1

New Member

Oct 21, 2010, 03:47 PM

B+S 3.5HP Mdl 91202-1309E1 - Carb connections

Looking for an exploded diagram of the carb/choke link/spring connections.
Does anyone know where I might find one?
Thanks

Check out some similar questions!

Backfire through the carb 17.5hp kohler [ 3 Answers ]

Hello, I have a 17.5 hp kohler cv491s on a 2004 deere riding mower. At 40 hours the engine through a rod. I disassembled the engine, the crank was okay so I polished up a little. I replaced the broken connecting rod and reassembled. I am 99% sure of the timing mark alignments on the small gear and...

Have just acquired an edger (PowerTrim 150 w/B+S 3.5 Mdl 91202-1309E1 Code 981217YA). [ 0 Answers ]

Have just acquired an edger (PowerTrim #150 w/B+S 3.5hp Mdl 91202-1309E1 code 981217YA). I am guessing the previous owner had attempted to rebuild the carb, as there seems to be parts missing. Have purchased a rebuild kit, but with no diagram, The correct placement of the springs/pushrods are...

13.5hp I/C briggs engine backfires through muffler and carb [ 1 Answers ]

Hello,I have a briggs intek 13.5hp ohv single cylinder engine I just rebuilt.when I go to start it up I have to choke it to get it to start.while its running it back fires through the exhaust and carb.Also the govener hunts.If I choke it half way it will idle high and run without backfire or...

View more questions Search

Check out some similar questions!

Add your answer here.