 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Heil Furnace:High carbon monoxide in exhaust, burner gets way too hot,
Overheats and shuts down. Should I repair the 10 year old furnace, or junk it for a new (different brand) new one?
Ist repair person suggested replacement. Repair labor between $600-1000, heat exchanger, burner. |
||||
Check out some similar questions!
Heil furnace burner starts then shuts itself off
[ 1 Answers ]
The burner ignites then it shuts itself off in like ten seconds
What should the carbon monoxide read on goodman furnace gms91155dxa
[ 0 Answers ]
What should the co readings be on this unit-GOODMAN GMS91155DXA
Heil furnace burner igintes then goes out
[ 3 Answers ]
I have a Heil furnace model number NUGK075AG02 (75,000 btu's) and the burner ignites for about 15 seconds then goes out and the fan continues to run. What might be the problem? Deka
Heil furnace short cycling of burner
[ 1 Answers ]
My 1983 heil model NUGK075DG01, natural gas, forced air furnace is running but only heats the house to 67 degrees no matter how high I set the temp, the fan continuously runs (in auto on thermostat) and the burner will cycle for 3-4 min. then shut-off for 10 min.. I have powered down and back-on,...
Carbon Monoxide
[ 1 Answers ]
How does Carbon Monoxide's structure allow it to be used?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
