Ask Experts Questions for FREE Help !
Ask
    ffmarcher's Avatar
    ffmarcher Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2010, 10:20 AM
    I have a craftsman DLT 2000 lawn tractor and the engine pulley spins all the time.
    Your Question: "I have a craftsman DLT 2000 lawn tractor and the engine pulley spins all the time. The blades always turn and do not shut off. The switch is getting power to the clutch, butt there is no response when switch is engaged or not... Please help.... Thanks"
    Bill_D's Avatar
    Bill_D Posts: 8, Reputation: 1
    New Member
    		  
    #2

    Feb 2, 2011, 11:27 AM
    This sounds like a bad engagement switch, replace it and it should solve your problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears Craftsman Lawn Tractor 17.5 HP B&S Engine [ 2 Answers ]

Had a bad starter motor replaced replaced start solenoid and magneto. Tractor will now start and run fine for 5 minutes. Or so then die. Won't restart. Also replaced battery and did a tune up. Checked fuel solenoid and it's not shorted or open. Battery is charging when tractor runs. This is...

Craftsman lawn tractor engine problem [ 11 Answers ]

I have a craftsman lawn tractor 10hp model 917.254220. The engine is a Tecumseh tvm220-157106h. The engine is seized up. Can anyone tell me the best option for a engine replacement. I can't find another tvm220-157106h. Thanks Jim

2004 craftsman DLT 2000 lawn tractor [ 1 Answers ]

I have a 2004 craftsman DLT 2000 with a 20 HP V-Twin kohler with foot hydro trans.I would like to know if there's a way I can get it to go faster it is a lot slower than the cub cadets I own.

How to remove engine pulley on craftsman lawn tractor [ 6 Answers ]

Hello, I have a Craftsman LT1000 lawn tractor (16 HP, electric start, 42" cutting deck"). The engine pulley which drives the drive belt for the rear wheels and the cutting deck has broken (the lower part of the top pulley broke off). I am trying to remove the engine pulley, but I cannot get...

Craftsman Lawn tractor engine dies [ 6 Answers ]

I have a Craftsman lawn tractor (model #917-257481). The engine dies when I pull out the PTO switch to engage the mower. Have replaced PTO switch and the "clutch" switch. It still does it. I can hear the PTO engage. With the new "clutch" switch installed it also dies when you let out the clutch. I...

View more questions Search