Ask Experts Questions for FREE Help !
Ask
    dads9054's Avatar
    dads9054 Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 17, 2010, 07:49 PM
    OK I have the same thermostats
    Are you saying use the e wire on terminal w2 and use a jumper from w to terminal y?

Check out some similar questions!

Thermostats HELP [ 2 Answers ]

Okay guys I just moved into a new place and the thermostat is way off. It's a mechanical one, so today I went out and bought a honeywell programmable one and tried to install it. The problem is the wiring which I have no clue. What is included in the honey well is: Y G W Rc Rh

Two Thermostats to One [ 2 Answers ]

I currently have a separate thermostat for the heater and the A/C... I want to combine them into one thermostat... I have replaced the thermostat before, but my knowledge of the wiring is very basic... My issue is that I have two "R" wires and I am worried about combining them together since it is...

Thermostats [ 5 Answers ]

I have a kind of off the wall question. First of all, we have a hot water boiler system which is 2 zone (1 upstairs, 1 down). I was wondering if there was such a thing as putting an extra sensor in the bedrooms that would trigger the thermostat to kick on if one of the rooms gets below a certain...

Thermostats [ 3 Answers ]

I have recently purchase a home and I found two thermostats installed, they told me one controls de AC and heat and the other one heat only, They're located on different rooms. Can anybody tell me how can I replace this two thermostats into one? Thanks


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.