 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Furnace filters are normally located in one of three places. 1. Inside the blower compartement, which will usually have filter anchoring divices of one sort or another. 2. In the return ductwork right near where the ductwork connects to furnace. 3. In your actuall return grill(filter girll). Changing the filter is normally pretty self explanitory, but there are cases where it can be a little confusing(especially when filter is in blower compartment, and anchoring devices are not there.) |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I changed the ignitor and the thermostat on my weather maker 8000, the fan runs good but there is no flame coming out at all, neither the ignitor will turn red. What else should I check?
If you install a weather maker 8000 upsidedown will it affect anything, or is it happy under any application?
I have a Carrier Weather Maker 8000 for which heating has refused to start this winter :mad: . On checking the error codes comes out to be 21 which states gas blockage. One of the suggestion was to shut off the heater and let it reset which has not helped. (Left it Off for the whole night but when...
Hello! Turned on furnace this year every thing was fine. Then I noticed that the temp in the house was 68 & the desired temp was set at 72. Then I set it up on 75 still did not turn on. About 2hr later the furnace turned on & shut off at 75. Every thing seemed fine. It turned on and off like was...
We have a weather maker 8000. And we have gotten a code 12 from the L.E.D light. The code means R-W closed. My question is what is the R-W and where is it located on the Weather Maker 8000?:confused:
View more questions Search
|
