 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My Miller furnace won't light.
When the temperature drops below the thermostat set point, the supply air blower comes on, but the burners don't light. The pilot is lit. I changed the batteries in the thermostat just in case this had anything to do with it but nothing changed. This is a Miller furnace in a mobile home. Any suggestions?
|
||||
Check out some similar questions!
We are trying to get our pilot to light on a Miller gas furnace for a mobile home... where exactly is the pilot light located?
I have the off,on, pilot and set position what is the set position for
I've got a natural gas Miller Furnace. This past weekend when I came home, the house was cold (62-ten degrees below setting) and I couldn't find anything wrong, so I just turned off and on the furnace, well it fired back up, but was only blowing air, not heating it up. There was a flame were it...
We purchased a modular home three years ago brand new. The furnace is a Miller. Three days ago the primary control went bad. Don't you think that's way too soon for a primary control to go bad? I want to complain to the company, but I have no idea how to reach the people who make the Miller...
I have a miller furnace. It runs on LP gas. It comes on the ignitor comes on the burners see to light but the blower won't come on. Is this the mother board? I have replaced this in the past. The ignitor was burned out and I replaced it. I still can't get the blower to come on.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
