Ask Experts Questions for FREE Help !
Ask
    gailh's Avatar
    gailh Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2010, 06:54 PM
    What does error message ooh mean on kenmore elite front washer?
    ITstudent2006's Avatar
    ITstudent2006 Posts: 2,243, Reputation: 329
    Networking Expert
    		  
    #2

    Oct 12, 2010, 07:35 PM
    "The "00h" appears in the display when the DELAY button is pushed. Pushing the DELAY button again before the estimated cycle time reappears will scroll the delay time upward (01h, 02h . . .). Holding the DELAY button down will also cause the delay time to constantly scroll upward until the button is released. Pushing the DELAY button will not wake the machine up from the idle mode.

    If you only get "00h" in the display occasionally and no other buttons or displays work, then the machine control board is not operating properly. If the control board experienced an electrical surge, it may be scrambled and not operating properly. Although it has only a slim chance to work, you may try disconnecting electrical power completely to the unit (unplug it or turn off the breaker). After several minutes, reapply electrical power. If the control will not respond and you only see an occasional "00h" in the display, you will need to call a service technician to diagnose and repair your washer."     -unknown forum user

    Rick
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Error Message F11 on Kenmore Elite He4T [ 5 Answers ]

I have a Kenmore Elite He4T washer that keeps stopping near the end of the wash cycle with an error of F11. It seems to not occur until 2 or 3 loads have been washed. It appears to be related to a final rinse cycle I think. The washer is a couple of years old. I can usually press the...

Kenmore elite frontloader error message F2 [ 0 Answers ]

My kenmore elite front loader is not draining and spinning properly and I am getting an error code of F2

Kenmore elite washing machine error message [ 0 Answers ]

Hi, My Sears Kenmore Elite washing machine is only about 2 years old and it recently started giving me an error message during the wash cycle of LD. I know it means LID because when it does this it stops the cycle and beeps continuously until I go over and the lid is unlocked so I open the lid and...

Kenmore Elite front loader washer error code [ 1 Answers ]

I have a kenmore elite front loader washer and I am getting the error message F35. I have tried to unplug the machine and let it reprogram, but it is still happening.

View more questions Search