Ask Experts Questions for FREE Help !
Ask
    dpryorsr's Avatar
    dpryorsr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2010, 10:24 AM
    Electric furnace blower motor not changing speed?
    Just replaced motor but the fan is not turning fast enough to push air through system?

Check out some similar questions!

Replacing a 3 wire GE furnace blower motor with a newer Dayton 4M098G multi speed mo [ 1 Answers ]

My GE furnace blower was a very simple, 5 wire installation, which the bearings wore out on. I am now truing to convert the wiring to adapt to my older furnace, and the new motor has more wires, and different color wires, and the schematic on the motor is too simple, it does not address the...

Changing a 1 speed furnace motor to a variable furnace motor [ 1 Answers ]

I have a 30 year old natural gas ICG furnace with air with a one speed ac motor. Is it possible to change to a two speed, or a variable speed motor?

Blower motor speed [ 1 Answers ]

How much does blower wheel size matter

Old Kenmore Heat FUrnace motor- changing speed [ 3 Answers ]

My blower is going at hi speed and I want to lower the speed as the sticker on the panel says it only has to run at med-hi speed. The motor is a 3 speed 230 volt motor. An HVAC tech came out and fixed the transformer, and during that time he disconnected all the wires and I am not sure he put them...

Can blower motor speed be adjusted on a Day and Night furnace ? [ 1 Answers ]

I have a Day and Night up flow furnace, about 13 years old. Can the blower motor speed be adjusted to a slower speed ? There is only 8 feet of duct and the noise coming out of the registers is very loud. Model # 395CAV036055 66,000 BTU Blower # 511, 1/3 hp If no one has any info, does...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.