 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi - I just had my old 100 amp panel replaced with a 200 amp panel, and as part of the process two grounding rods were driven, and a new mast was installed. I'm hoping it was done correctly, but some of the choices made by the electrician just don't look right to me. I have not had the work...
Is there anyway that sombody tell what is the length for ground rods for trailers ,someone told it should be like 8 feet long ,but I find it difficuilt to get that length of the ground rod under the ground ,is there any other way,another person told me that I can connect three shorter grounding...
I pulled a 100 amp subpanel from my house main to a workshop (2legs/neutral/grd) put did not grd rod the workshop panel. I believe I need to drop the grd from the main and add a grd rod; is that correct? Also, now I am adding a subpanel from the wokshop panel to another unattatched building. I...
I am in the process of installing a brick patio in the back. While digging out the area I ran into two rods with the grounding wire from the house attatched. The tips of the rods were sticking out of the ground slightly covered by mulch. I don't want to move the rods or the patio. My question is,...
First off thanks everyone for all your help so far. I have a question about a grounding rod. Can it be used in place of a water utility connection? My water meter is a good 50 feet away from my house and I am pretty sure that the pipes that run into the house are non-metallic, plus I have no...
View more questions Search
|
