 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Convert a closet to hold a ventless combo washer/dryer
I want to convert a coat closet to hold a ventless washer/dryer combo. The back of closet meets a bathroom, so I'm hoping plumbing isn't a problem. This model only needs a standard 120v three prong plug, which I know will have to be installed. The closet is plenty roomy right to left but it's a tight fit back to front . Will this work?
|
||||
|
||||
|
You need to know what you can access through the closet wall without ripping out any expensive bath stuff, and how far away the waste vent is above the washer drain (or are you saying you don't need venting for the water? I don't believe that), and what your local code is for the distance to the vent. You can map all that out yourself. You need to know your house total amps, and if the circuit panel can add the required 30 or 40 amp circuit. The place selling you the w/d will be able to tell you.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The washer will fill and it will agitate for about 10 seconds, then it will stop.When it stops there is no motor sound.Then after about one minute it will start by itself and repeat the same thing over and over no matter what I set the knob to it does the same thing. Could it be the timer?
Kenmore washer dryer combo 110-92966-102, The washer will fill and it will agitate for a little bit for about a minute, then it will stop before finishing.When it stops there is no motor sound.No matter what I set the knob to it will not start up again,but if I wait several minutes it will...
I've just spent nearly $1,500 on purchase and delivery for a Supra SW5L30D that connects to the kitchen sink faucet with a tap adaptor and unicouple. The ads and instructions do not warn that, if sink also has a spray attachment hose, to disconnect sprayer hose and plug hole. I read today on a...
View more questions Search
|
