 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
This furnace worked fine one day, but would not fire the next. Thermostat would click when I turned it up, but furnace would not come on - no sound at all at furnace. Then 5-10 minutes. Later the blower would blow cold air for a few seconds. I am not the original owner of this home, but have...
Pilot light will not light on Interherm furnace model mgha 075 And when it was lighting it would blow out after a few uses I have put in a new thermocoupler
I have a Ruud Silhouette II Gas Furnace. The whole unit is turned off/on by a light like switch. The AC is working, but the heater is not. It appears that no gas is flowing to the burner. The PWR light is on, steady. The OK light is flashing; three times on, then off. The Flame light is off in...
My pilot light on my furnace need to be lite and not sure how to light a pilot light, I see the knob to turn that say on, off and pilot but not sure where to hold to fire and not sure if I need to hold the knob down that say pilot at the same time please help.
I have an older model Intertherm Furnace.. Its 30 years old.. How do I light the Pilot light?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
