Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to convert 208V, 3ph to 240V, 3ph
[ 1 Answers ]
How to convert 208V, 3ph to 240V, 3ph
1/6 HP 2-speed 1075 rpm 208/230 volt condenser fan motor wiring diagram
[ 2 Answers ]
I am having trouble wiring the condenser fan motor in with capacitor and new contactor on a single phase 240V system. I have no wiring diagrams to go by as this condenser is 20 plus years old. The compressor will fire but I cannot get the fan motor to run even though it's wired off both sides of...
3PH 480V motor wiring and tripping on overload
[ 4 Answers ]
:confused:REPLACED EXISTING DAYTON MOTOR WITH EXACT MODEL NUMBER. 3PH 480V WIRED IT EXACTLY AS SHOWN ON NAME PLATE. KEEP TRIPPNG BREAKER. NAME PLATE INDICATES 1.9AMP FULL LOAD. I MEASURE 3.4AMP. MOTOR IS USED FOR BELT DRIVEN BLOWER. IREMOVE BELT AND I HAVE 1.4AMP READING IS THIS NORMAL(NO LOAD)...
3ph motor
[ 2 Answers ]
I have 15hp 3phase motor rated 460/230V how can I run my motor if my supply voltage is 380v 3phase...
3ph motor
[ 5 Answers ]
I'm having only a single phase supply. How can I run my 3phase motor without using A phase converter? View more questions Search
|