 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Armstrong Ultra SX 80 circuit board replacement?
Hello,
I have an Armstrong Ultra SX 80 Model #GUJ075D10-3A. My circuit board numbers on it says FCC-1A 40403001 then 9807 below. The R-1 sensor is burnt on both sides and I believe this is my problem. I want to replace the board myself but I don't know what board I should get to replace it with. I'm not a H/C guy and I am confused and I'm not cross referencing it right or something. Some sites say replace it with part #40403003 at $134 and another site it says code # CIB9120C2028 at $188. Both pics look like different boards. My model number doesn't really match exactly with perfect. I just don't want to get the wrong one. Any help would be greatly appreciated. Thanks |
||||
Check out some similar questions!
Armstrong gas pack flashes twice when flame shuts down. Is this the flame sensor?
Armstrong Air Ultra V, 4 yrs old: Problem: *Igniter comes on with bright red/blue flame *Burners then come on *Fan blower comes on *Shortly after blower comes on, burners go out, and blower continues to run *Igniter comes back on *Burners then come back on *Then Burners go out again...
This all started about a week ago. One night we woke up to a very cold house. The furnace hadn't kicked on at all during the night. It's an Armstrong ultra sx80. It has the automatic ignition. When I went to check on it, I took off the panels and vaccuumed it out and noticed that when I ran the...
I need to replace my pressure switch made by TRIDELTA. I believe it is part number PPS10090-2615. It also has the following numbers: 046317/0014/B and 44819-002. Does anyone know what the specs are for this pressure swtich? Is there a less expensive option for replacement? Any feedback...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
