Ask Experts Questions for FREE Help !
Ask
    gjdulian's Avatar
    gjdulian Posts: 46, Reputation: 12
    Junior Member
     
    #1

    Oct 8, 2010, 05:49 AM
    Whirlpool Accudry dryer, model LGQ8000HQ1 - Too Hot
    I have a Whirlpool Accudry dryer, model LGQ8000HQ1. Tonight I got home and my wife says the dryer is a lot hotter than normal. Hot to the touch when on Medium setting. Low setting seems fine.

    Could it be a bad cycling thermostat or maybe the Electrode Sensor pad inside the drum?

    I'm pretty handy, but I've never done any work on this dryer, how hard are these pieces to replace?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Oct 8, 2010, 04:13 PM
    Check to see if the lint screen or vent is plugged. Air is pulled through and exhausts outside. If these are plugged, the residual heat builds up and usually the clothes won't dry because the water vapor has no place to vent.
    gjdulian's Avatar
    gjdulian Posts: 46, Reputation: 12
    Junior Member
     
    #3

    Oct 10, 2010, 08:30 AM
    There is good airflow, nothing is plugged.

    Anything else I should check before I buy a new cycling thermostat and/or Electrode Sensor pad ?

    Cycling Thermostat
    Electrode / Sendor Pad

    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #4

    Oct 10, 2010, 10:48 AM
    Comment on gjdulian's post
    It could be either part. Considering price, wouldn't be $$ to replace both and since you are handy, no cost. Be sure to disconnect the power! Website link ratings show 2 hrs for t'stat but I find that high. Usually takes 20 minutes or so.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool dryer, Model LEQ9508PW1, not getting hot [ 1 Answers ]

My whirlpool dryer, Model LEQ9508PW1, is not getting hot. How do I fix it?

Whirlpool Gas Dryer Model LGR5848EQ5 [ 1 Answers ]

Set the dryer timer and turned the dryer on. It ran for 5 Hour, we opened the door to stop the dryer. This is the first time this happened. Is my timer going bad?

Whirlpool dryer model ler5644pq0 [ 1 Answers ]

Hi, I have a whirlpool dryer that won't run. I do believe it is the starter switch and I do know where it is but I can't get to it. Please help. Thank you!

Whirlpool dryer model # ler4634eq0 [ 1 Answers ]

My dryer will turn but will not heat. What do I need to do to repair it?:confused:

Whirlpool duet dryer '07 model [ 1 Answers ]

The lite on the left bottom of the dryer is lit that says "control lock" which prevents the dryer from turning on, I cannot get it to shut off. Any knowledge on this? I do not have a manual. Thanks


View more questions Search