Ask Experts Questions for FREE Help !
Ask
    toitoy3morris's Avatar
    toitoy3morris Posts: 2, Reputation: 1
    New Member
     
    #1

    Oct 3, 2010, 02:49 PM
    How do I get water pressure to circulate for heat in 84'chevy caprice classic
    I have changed water pump, thermostat, heater vacuum ball. I feel vent air and defrost works just not the heat. *** help

Check out some similar questions!

Using a duct fan to circulate wood stove heat [ 4 Answers ]

I have a wood burning stove in my living room and it often produces way more heat than I need for the room, so Im wondering if I can use some duct work, a fan, and an AC thermostat to spread the heat around my house and reduce my furnace running times. There are no existing registers in the room as...

89 dogde water won't circulate through the motor [ 1 Answers ]

Just put a new water pumpand a new thermastast the fluids keep going out the over flow

1994 Caprice Classic Spark Plug Wires order [ 0 Answers ]

Hey, Im replacing the spark plug wires on my caprice classic and a buddy was helping me out. Well long story short he pulled off all the distributer wire sides on the passenger side at once and now Im stuck wondering which plug plugs wires go where, I know the eighth plug goes to the bottom... any...

Rheem Classic 90 Plus Pressure Switch [ 5 Answers ]

I have a 6 year old Rheem Classic 90 Plus Horizontal Gas Furnace (Propane). Pressure switch sticks which causes furnace not to light 1st thing in the morning. When furnace will not start, I remove tube from fan and blow/suck on the tube. I can hear the pressure switch "click" several times and...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.