 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Dishwasher- how does the water turn the 2nd rack sprayer?
There is a tube that rises from the bottom rack, it blows water up like a fountain, it does not touch the bottom of the 2nd rack sprayer, somehow it suppose to squirt water into the sprayer, and the ater comes out the holes in the arms. But what makes it rotate? Mine just stays in one spot, yet if I tap it it spins free enough. Am I missing a part? Shouldn't there be an impeller or something to guilde the water, and as well turn the arms? Other wise the water just blows up into, and through the arm, and bounces of the top of the inside of the dishwasher, the amount of water that comes out of the holes in the arm is plentiful, I hake cleaned thearms out with a wire, and there's is no clogs, but what should make it spin? It just sits there and does not move?
|
||||
Check out some similar questions!
My sink runs fine, my sink sprayer runs fine, however, the head is loose and whenever I try to use it or sometimes even when I turn the water on, the head pops right off and water goes everywhere. Is there any way that I can secure it to the hose? Or do I need to replace it? If I have to replace it...
We have a DU840 inherited in a foreclosed home that we bought. Turned it on and ran through a complete cycle. However, none of the dishes were cleaned even though the detergent dispenser opened. There was water in the bottom at the end of the cycle. Apparently, the sprayer arm did not spin...
A small plate was put in the middle back of the top rack of my dishwasher. When the rack was pushed in the plate became wedged behind the mechanism in the upper inside of the machine, and now the rack can't be pulled out. I've tried reaching from below the plate and haven't been able to move it. ...
We have a whirlpool dish washer(GU1500XTLQ0) that is around 4 years old. The top shelf seems to not be cleaning. I ran it with the door partly open and can see it is getting water up the arm. I tooy out the arm and it is not blocked and spinns freely. The very top spinner gets no water out of it....
I have a 3 yr old Kenmore dishwasher that is not spraying any water on the top rack. I have already disassembled the upper wash and rinse parts and verified they were not plugged up. Is there anything else I can check before calling in the repairman?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
