My suction and liquid lines are extremely hot

Check out some similar questions!

What should I check if liquid line is cold and suction line is warm? [ 4 Answers ]

The unit was installed 3 years ago. It was never started until now. I have changed the filter dryer, vacumed, and I opened the txv inside the cased coil. I have sucked the refrigerant back, and vacumed 3-4 times, but the liquid line stays cold and the suction line stays warm. I do know the...

New AC installation - should both liquid and suction line dryers be installed? [ 7 Answers ]

To make a long story short I've have a bad experience trying to get some repairs done to an existing aire-flow unit. $800 later I'm scrapping the unit. I've ordered (online) a new Rheem Classic 3 ton 13 seer condenser, coil and 100,000 BTU gas furnace. I am not going to try to install the unit...

4 ton r410 to 3/4 suction lines [ 1 Answers ]

What will be the possible problem

How does liquid remain at constant temperature whilst there are both liquid and solid [ 1 Answers ]

Why does the temperature of a cooling liquid remains constant whilst there are both liquid and solid phases present Thank you

Extremely hot air going to my chimney? [ 10 Answers ]

Hello, We recently had a new furnace installed. It's a goodman GMH8 (goodmanmfg.com). I've read all the available documents, but can't seem to figure this one out... (I am NOT an hvac guy what so ever) There's a 6" pipe that goes from the inside of the furnace, presumably the blower... to...

View more questions Search

Check out some similar questions!

Add your answer here.