 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
At Ace Hardware (and probably other places) there is an item called "Just For Copper" which comes in an Elmer's Glue like plastic bottle. It is a cold weld for copper pipes (brass too) under 2". I have used it in places where I am temporarily putting on an end cap on. It is easy to use since you...
I have a 33mm push on 90 Deg joint from my hand basin under the floor boards, which recently came off and flooded the kitchen. Am I OK to replace the joint with a weld joint using the existing waste pipe or would I need to replace the pipes too? Thanks.
A little advice here would be most appreciated... Six year old home, slab on grade, one-piece fiberglass shower unit with solvent weld drain over what looks to be a 2" PVC pipe. Original installers must have overtightened the screws that hold the strainer down. In doing so they broke the...
I live in a condo. All of the units in the building need to new air conditioners because they are all old and will not survive a scheduled reroofing of the building. The association got a bid for a company that will put in a new condenser unit for anyone who wants one - it is about $1500 installed....
I'm trying to add some pipe work to what I thought must be a 50mm Solvent Weld type Tee piece. But when I measured the internal diameter of the tee piece it is actually 55mm and the 50mm pipe I have just rattles around inside. I thought that waste pipe only came in 50mm, is there such a thing as...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
