Ask Experts Questions for FREE Help !
Ask
    m.hollett's Avatar
    m.hollett Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 27, 2010, 05:35 AM
    Check valve installation on power-shower pump
    I need to install a one way check-valve to my power shower pump because the pump is "shunting" when the valve is turned off. Should it be fitted on the input or output side please?there is a flow switch fitted to the output side already.

Check out some similar questions!

Water pump check valve [ 2 Answers ]

When I leave the cottage for a day or so, I will turn off the power to the pump. When I return and turn the power on, I have lost pressure, but still maintain prime in the pump. What's wrong?

Check valve fix for well pump ? [ 1 Answers ]

I have a submersive pump well system and my check valve has gone bad. So my question is can I install a new check valve up by the bladder or do I have to pull the pump up and if that's the case then how hard a job is that to do

Check valve installation [ 1 Answers ]

I am getting back flow from washing machine into slop sink. Can a check valve be installed horizontially between sink and washing machine. Thanks for any advice in advance.

Septic pump check valve [ 1 Answers ]

My septic (effluent) pump runs about 5 times a day. This started about a week ago. I think it is my back-up valve. How do I remove and check valve? After I am finished how do I ensure that my pump is primed and working?

Check Valve Installation [ 1 Answers ]

I have a waterfall for my pool which is very tall. The pump was installed at the top for some reason and must suck the water out of the pool (approximately 30 feet up). It takes a long time and I'm afraid the pump will burn out. I prefer not to install a bulky check valve at then end of the line...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.