Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to change a pull chain fixture to a fluorescent light fixture with a switch ?
[ 1 Answers ]
I would like to install a switch for a pull light fixture. The only power is from the light fixture, but I want to put a light switch on the wall as I enter the room, Can you help ?
Lay-in Fixture lens issue
[ 1 Answers ]
I have a problem I've been trying to solve for a few weeks now. The Lay-in Fixtures I have in my office drop-ceiling need lenses. I have lenses in all but one of them because I can't seem to find anywhere that sells the "holders" (as I've dubbed them) They are a small piece of plastic that has a...
I tried using a PAT and TAPCON screws to attach a bottom plate to the concrete floor
[ 2 Answers ]
The PAT causes spalling for about a 1/4" and if it does go in will not hold. I tried using both 2 1/2" and 3" nails. The surface of the concrete seems brittle and the rest too hard. The nails will also bend in the concrete. The floor is about 5 years old. I tried using TAPCONS but they either...
Convex Lens?
[ 1 Answers ]
If one half of convex lens is covered with black paper, will it produce a full image? Please give reasons for your answer..
Best lens
[ 5 Answers ]
:confused: what is the best size lens I could use for landscapes and wildlife and what make :confused: View more questions Search
|