Ask Experts Questions for FREE Help !
Ask
    station7's Avatar
    station7 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2010, 12:15 PM
    Bad solenode or switch?
    I have a 2005 Kubota b7800 tractor that just stopped running. I removed the fuel solenode and cranked the tractor. I checked the solenode by running two wires from a battery and nothing happened. I ordered a new solenode. I got the new solenode and put it on and the tractor will not crank. I checked the new solenode like I did the old one and no click or pin move. Why not? I checked the wires going to the solenode with a test light and there is no fire. Could it be the switch?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Sep 25, 2010, 01:30 PM

    Remove and fully charge, or replace, the battery.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bad switch or lever [ 2 Answers ]

I have a 10 hp 30" Craftsman II Electric start mower. #502-255050 It will not start unless I move the ingage back and forth several times. I can not see any switch of safety on it that makes it start. Do you have a skematiac to tell me what to do? Your help will be appricated. Jim downing

Bad pressure switch? [ 1 Answers ]

I have been having some problems with my water/well system. It started with reduced water pressure that would surge a bit as the pump turned on and off. We started losing water altogether and I found that if I moved the wire leading to/from the pressure switch(square D, 30/50) then the system...

Is my GFCI switch bad? [ 1 Answers ]

5228 5229I hooked my 2 pole 50 amp GFCI up inline with the house power coming from the circuit Breaker box, the line out to the hot tub isn't hooked up yet. I get readings of 118v from the red to neutral and black to neutral both on the leads from the house power, and also with the switch on,...

Bad Solenoid Switch? [ 3 Answers ]

Hi all... Just had a repairman out to fix the A/C two days ago. A/C was running but not cooling (no frosting of coils, no clogged ducts, compressor fine, etc). Repairman stated that it was a faulty "solenoid switch" and replaced it successfully. For the last day and 1/2, A/C has been running...

Whole house fan with a bad switch. [ 2 Answers ]

We have a jet air whole house fan with a switch that stops and starts during the cycle. The unit is less than 3yrs old. Do I need a new switch? Can I do the work myself? Your knowledge is greatly appreciated. Thank you.

View more questions Search