Ask Experts Questions for FREE Help !
Ask
    Mairim's Avatar
    Mairim Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2010, 06:55 AM
    I have a Panasonic TH-42PA20 when a try to start it, there is a red light flashing
    I have a Panasonic TH-42PA20 when a try to start it, there is a red light flashing and its trying to start but its like there is not enough power, any idea?
    JudyKayTee's Avatar
    JudyKayTee Posts: 46,503, Reputation: 4600
    Uber Member
    		  
    #2

    Sep 25, 2010, 07:16 AM

    We are all volunteers here - please don't keep posting the same question. Someone with this knowledge will sign on, see your question and answer you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Ultra Wash dishwasher won't start, red control lock light flashing [ 8 Answers ]

Kenmore Ultra Wash dishwasher won't start. The control lock red light (above the "start" pad) flashes when I press "start" or any of the control lights. The door is closed completely.

Carrier Furnace Problems - flashing red light [ 7 Answers ]

I have a high efficiency carrier furnace. When I came home yesterday I noticed that my house was a lot colder then it should be. The fan was blowing but no hot air. I checked the furnace and the LED red light was flashing - 3 quick then 1 long. On the back panel it said this indicated one of a...

Flashing red light on gibson furnace [ 2 Answers ]

My gibson furnace is not heating, when I looked inside, I saw a flashing red light and no flames. What could be the problem?

Electronic ignition red light flashing sequence [ 1 Answers ]

I am trying to find a manual on a Concord furnace. At this time the blower starts but the burners do not light and then the system shuts down until power is cut and then turned on again and the same thing occurs, the rde light flashes 3 times before complete shut down occurs. What does this mean...

Flashing red light code ? [ 10 Answers ]

OK I have seen the same question asked and followed the instructions, BUT I can't find the meaning of my code on the inside of my access panel. I have a Trane XE80 with a White-Rodgers 50a50-473 control panel, the heat cycles on and off every 20 30min. The flashing code is (I think) 14 ...

View more questions Search