Ask Experts Questions for FREE Help !
Ask
    twinbo's Avatar
    twinbo Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 24, 2010, 09:01 AM
    What kind of outlet cover do you use for a outlet in a mirror in the bathroom?
    The outlet cover I have doesn't sit flush with the mirror. The outlet sits back in. Is there a type of cover that will help with this or do I need to redo the outlet?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Sep 24, 2010, 09:24 AM

    How far back in? Can you post a pic?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Sep 24, 2010, 09:51 AM
    There are extension rings for single gang wall cases that come in various thickness you can use to fill in the space of the glass.

    Sounds like you have an opening in the glass large enough for the entire finish plate to fit through. If this is the case, you can find oversize finish plates and along with the extension ring all should look fine.
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
     
    #4

    Sep 24, 2010, 07:37 PM
    If you can remove the mirror, you can replace the ring which holds the receptacle. Sometimes called a plaster ring, they are available in various sizes to accommodate different wall thicknesses.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert Electric Dryer outlet to regular outlet [ 8 Answers ]

I just bought a gas dryer, leaving a funky 3 pronged outlet unused. The outlet was connected to the fuse box as a single circuit and I would like to let the new gas outlet take advantage of this. Is there any problem replacing the 'funky' electric dryer outlet to a regular three pronged outlet,...

Wall switch controlling a outlet,want to use outlet to control ceiling fan [ 3 Answers ]

I Have a wall swich that currently controls a baseboard outlet. The Wall switch has a white,black, ground coming in from the top of the box-- and a white,black,red,ground coming in from the bottom of the box. The two blacks are tied together/two whites tied together... the red goes to the switch...

What kind of outlet need for these appliances [ 1 Answers ]

I bought a Kenmore 30 in. electrical selfcleaning stove 240v-60hz and a Kenmore Top Freeser Refrigerator when I had the appliances delivered they told me I could not put the stove where I wanted to because it did not have the proper type of outlet--what kind of outlet would I need to be able to...

Converting regular 3 prong electrical outlet to dryer outlet [ 3 Answers ]

We just bought a stacking washer and dryer and now the electrical cord on the dryer won't reach down to the existing dryer outlet. Is there any way to convert a regular 3 prong outlet that is close enough into a dryer outlet?

Outdoor electrical outlet keeps tripping gfci outlet [ 3 Answers ]

Until just recently my christmas decorations would light up when we plugged them into the outdoor electrical outlet. Now when we plug it in the gfci outlet in the garage keeps getting tripped and the lights won't come on. Even when we reset the gfci, once we plug in the chord it gets tripped...


View more questions Search