Ask Experts Questions for FREE Help !
Ask
    gradylawrence's Avatar
    gradylawrence Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2010, 07:33 AM
    How do I set target temp up from 70 to 75
    I have a ritetemp #8035c, My target temp is set at 70, when my room temp reached 70 my unit did not turn off . I would like to increase the target temp upward to 76 to try to have my temp raised. How do I do this ?
    I don't have a manual. Can I get one?
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Sep 23, 2010, 04:41 AM

    Here is the operation manual for your thermostat. This should tell you all you need to know.

    Best of luck,
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier furnace turns off before target temp, then right back on [ 23 Answers ]

I have a approx. 6 year old Carrier 58STA110 natural gas furnace. The blower motor and circuit board was replaced last year. I have installed a new digital thermostat, and the problem is still happening. The filter is new. No return vents are blocked. There is no signal of an error on the...

Haier Furnace shuts off before reaching target temp [ 4 Answers ]

Hi All, A few months ago my furnace was set to heat at 72 and before reaching the temperature, it cycled on/off three times and then shut off. I had to manually restart from the thermostat to get it going again. To fix the problem, I replaced the filter and everything seemed OK. Three...

Furnace not reaching target temp [ 12 Answers ]

My furnace never reaches the target temperature on the thermostat. Even if I increase the temp on the thermostat, the temperature is never met. The current temp is set for 74 degrees, it was 62 this morning? The furnace is a Goodman, the thermostat is digital. I just replaced the thermostat...

Heat not kicking on until the temp dips below 64 degrees, target temp set to 72 [ 2 Answers ]

Hello, This is my first time posting here, but I figured it was a good place to start for some advice. I just bought a new townhouse a few weeks ago and have been having some heating issues since moving in. The actual furnace (Goodman GMS 8045) was installed in June of '06 while the unit was...

Furnace not kicking on when temp drops below thermostat set temp [ 1 Answers ]

I've got a Beckett oil heat water on demand furnace that heats through baseboards. Since this past weekend the furnace hasn't been kicking on when the temperature drops below my set temp of 68 degrees. I have to go down to the furnace and simply touch the top of the reset box for it to kick on. ...

View more questions Search