 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My ac only works when fan is set to "on" and not on "auto"
I have goodman gmp075-3 furnace. I replaced the blower motor, blower wheel, capacitor, and the circuit board. My wife is pregnant with twins so I have to fix this quick... AC only comes on when the fan is set to on instead of auto... if I put it on auto the blower kicks on but AC outside freezes. Please help!!
|
||||
Check out some similar questions!
I have a carrier central air & heat. When set to auto - fan for heater, the fan attempts to turn on and then stops. When I set the fan to on it turns on. What could be the problem? The thermostat is set to 70 and it is 60 deg in the house. Thermostat shows that the heat is on even though it is off....
I have furnace/AC made by Comfortmaker, model RPJ II with a White Rogers Digital Comfort Set II thermostat. Furnace comes on, but not fan when on auto. When I turn fan on manually using thermostat all is well. Is this a thermostat problem or fan control on furnace and can I fix?
I have a Honeywell T8011R programmable Thermostat. The fan has two settings, Auto and On. It seems the "On" doesn't work. When the temperature falls below the setpoint the heat kicks on and the blower works then, but when I switch to fan "On" it still kicks off after the house heats up to the...
My problem is a little bit different then those I read about. My thermostat just started not to turn my fan on when the heat starts up, causing it to shut off. The only way my heat works now, if I manual turn the fan setting from AUTO to ON. Which causes my fan to run all day. Please help! It was...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
