 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier Model 58G5100-2
I have a Carrier Model 58G5100-2 Series 201 gas furnace. It appears to have a squealing motor in the air handler caused by a loose belt. I'm ready to apply the belt dressing and replace it as needed. Simple question: Where is it and how do I access it? Can't get to it by removing the main access panel and am at a loss. Also have a central air conditioner that also uses the blower. Cannot locate a Users Manual for this old unit.
Thanks for any help available, including tips on how to fix when I find the blower motor belt. |
||||
Check out some similar questions!
Error code 14 is displaying. When I turn off power and turn it back on the furnace ignites, all burners light and furnace heats until thermostate desired temperature is reached. I cleaned the flame senser with steel wool. The furnace works okay for a time or two again then repeats the error code...
My carrier furnace model 58MVP broke down this morning. Fault code is "4-2" - inducer rpm out of normal range. Any suggestions on how to obtain a new module and how involved the repair is? Have scheduled a service appointment, but no one can get her for at least next day at best. Thank you
I have a Carrier Furnace, model 58ZAV096-16. It was flashing a code 34 but the Heat/Air person that came out did not know what the code was and was not on the furnace itself. He cleaned the rod in front of the ignitors and put in two new filters. This was an intermittent problem with it shuting...
Hi I am looking for some help working on a Carrier model 59zav!
I Have A Carrier Model 58sta070 Gas Furnace With Central Air. It Is Currently 82 In My Apartment. My Temp Is Set To Cool At 70. No Such Luck I Have Check Everything I Can Imagine. It Was Working Fine In The Morning Prior To Work And I Got Home After And It Was Hotter In My House Than Outside. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
