 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I bought a house with an indoor spa in a partially finished (drywalled) room in the basement. I am looking to finish the room it is in and am wondering what is the best way to finish the room? I am planning to lay ceramic tile on the floor but am debating wall finishes. Drywall? Green board?...
The Basement Wall Is 4 ft concrete & A 3/1/2 ft pony wall or I call it a knee wall (3/1/2 ft wood on top of concrete).The concrete wall is 5 inches wider than the pony wall.How do I frame & insulate this complicated wall ? I can put a wall up against the concrete to the floor joist , but I will...
I want to remove about 6 feet from an interior wall. The rafters run parallel with the wall but the reason I think it's load-bearing is because one of the trusses rests on the middle of the wall with a lateral x across it. I have existing pictures and a drawing of "the existing" and what is...
Hi guys , I am loving this forum so much its becoming difficult to stay away. Anyway , a few weeks ago I built a concrete brick wall , following instructions from a masonry book and it turned out pretty good : problem is I don't know how to mix or apply that smooth white looking finnish that the...
I am putting a 1/2 wall in my family room. The slab is 34 years old (very very hard cement). Someone told me to use gorilla glue. Not sure about how well that would work. Looking for some more ideas. Also, this half wall is going up 3 foot and out 6 foot. (not to ceiling or other side of room) How...
View more questions Search
|
